Uncategorized Archives - Evolving Elements

Exterior Painting: Everything You Need to Know

Looking to give your exterior walls a new coat of paint but don’t know matt finish acrylic paint from metal roof rust inhibitor? No need to worry. You can still leave your home exterior looking brand new by following the simple steps we’ve laid out below.

 

  1. Pressure-wash your walls

Painting exterior walls comes with a significant amount of preparation. In fact, the prep work may take longer than the actual painting. Since your exterior walls are exposed to the elements, it’s important to start any premium exterior paint job with a thorough pressure-wash to remove dust and dirt build-up.

 

  1. Sand it down

In addition to pressure-washing away years of built-up dirt and grime, you’ll also want to sand down any rough surfaces, such as chipped wood or chipped paint. Rough surfaces will keep your paint from sticking properly to the surface of the wall, so take your time and go over any rough surfaces with some sandpaper.

 

  1. Repair damaged surfaces

As well as sanding down any rough areas, take time to look over your exterior walls and repair any cracks or damaged areas. Repair cracked window seals with caulk or replace any rotted or busted wall panels before you start your paint job.

 

  1. Remove loose existing paint

The prep work still isn’t done. Strip any loose or chipped paint and sand over the exposed area to ensure it’s smooth. The last thing you want is any rough surfaces ruining your paint job, so take as long as necessary to ensure your wall surfaces are properly prepped.

 

  1. Check the weather

Before you start on your paint job, it’s a good idea to check what the weather will be on the day you plan on painting. Rain, wind, and even extreme heat can significantly affect your paint job. It’s also worth taking into account the general climate of where you live when selecting your paint.

 

  1. Choose the right paint

Just like you need to select the right paint for your interior walls, there are paint types specifically suited to what the outside world will throw at your walls. If you’re unsure of what you need for your exterior walls and the climate of your area, speak to an expert.

 

  1. Clear and cover the area

Just like you would clear out a room and cover any carpeting, flooring, and furniture before you start a paint job, the same needs to be done even with exterior paint jobs. Move any outdoor furniture or fittings and cover up and plants or anything you don’t want covered in paint.

 

  1. Prime your walls

Primer is an important step in any paint job, especially so if you happen to be changing the colour of your exterior walls from light to dark or dark to light. If you’re painting the same colour, you can get away without a primer coat, but it’s always a good idea to start with primer.

 

  1. Paint trims and doors

Finished painting the walls? The job’s not done just yet. Don’t forget to put a coat on any trimmings, doors, and window frames to make sure your job looks complete as a differing trimming can make your newly painted walls look not quite right.

The Different Types of Wall Paint & What They All Mean

Oil-based? Eggshell? Gloss? Acrylic primer sealer undercoat? Doing a DIY paint job can be a bit overwhelming, especially if it’s your first time. The fact of the matter is, like many DIY projects, painting doesn’t have to be overly complex, it’s simply a matter of knowing the rules and following them closely. It’s a process that’s time-tested and if you try to cut corners, your walls will pay for it.

If you suffer from a particularly bas case of paint-phobia, not knowing whether you should go water-based or oil-based for your home, we’ve gone ahead and put together a handy little guide that takes you through the different paint types and what they all mean, so you can discuss your paint needs with confidence when you head down to the hardware store or paint shop.

Water-Based
Water-based gloss paints are precisely what they sound like–water-based. They’ve increased significantly in popularity in recent years thanks to their price point and several other advantages. They don’t require any pre-treatments, which makes them quite ‘user-friendly’ and they dry quite quickly, though treatment will be required if you’re painting over existing oil-based paint.

Oil-Based
Unlike water-based alternatives, oil-based paints are more robust. What does that in practice? For starters, many people prefer the oil-based ‘look’ due to its gloss. The finished product, which takes considerably longer to dry than water-based paint, is also more durable, so it’ll take longer for your paint job to show signs of wear. Oil-based is also recommended for any rooms with high levels of moisture, such as the bathroom or kitchen.

Matte Paint
Matte paint is ubiquitous as it does a good job of covering up imperfections in your wall and acts as more of a ‘base’ rather than an aesthetic element unto itself. Basically, matte paint has a flat finish that’s not distracting in its shine. However, matte paint does require a few coats in order to bring a more solid colour to your walls and will require retouching from time to time.

Gloss / Semi-Gloss
Probably the other market leader when it comes to wall paint is gloss or semi-gloss. It’s all in the name, really. Gloss paint brings a shiny, gloss finish to your walls, whilst semi-gloss is a bit more toned down in terms of the glossy finish. It’s the preferred option for painting on wood, but be aware that gloss paint does a good job of bringing out any imperfections in your walls.

Satin
Like gloss paint, satin will make imperfections in your walls more noticeable, but it’s the perfect solution if you’re looking for something in between a gloss and a matte finish. Due to its slight gloss, however, it will mean that you’ll need to keep up the maintenance, so keep this in mind if you opt for a satin finish paint.

Eggshell
A popular option for many homeowners is eggshell finish. Eggshell finish is popular due to its ease of use–you can apply it quite easily and it doesn’t take multiple coats to get a solid result. It also has a mostly matte finish, though with a slight gloss that won’t bring out the imperfections of your walls.

What You Should Know Before Painting Your House

Don’t know the difference between acrylic undercoat and oil-based? No need to stress. We’ve gone ahead and put together a handy guide of the essential things you need to know before you start on your home renovation plans. Read through them carefully and you’ll avoid disaster.

1. Room Preparation Is Crucial
If you’re taking the time and money to repaint a room (or even a whole house) it’s because you want to give it a bit of a facelift, but your facelift may end up a disaster if your freshly repainted room is populated with paint-spotted furniture. Make sure you get everything out of the way before you start!

2. Cover Up The Cracks
Most walls in older houses will have a crack or two, maybe even a small hole or divet. Get out the spatula and some putty or caulk to fill these gaps before you start painting so the finished job looks spotless.

3. Know What You’re Working With
Different types of surfaces—brick, stone, stucco–need different types of paint. If you’re unsure of what your particular walls need, head on down to your local paint or hardware store and ask the experts.

4. Get The Right Paint
Once you know what it is you’re working with, choose the right paint for the job. The last thing you want is to come home with bucket loads of the wrong kind of paint, so do your research or speak to someone in the know.

5. Know Your Weather Conditions
Believe it or not, it’s critical to check the weather forecast before you start on your paint job. Why? Different weather conditions will affect how well the paint sticks to the surface of your walls as it dries.

6. Test The Paint
You’ve got your paint and you know it’s the right one for your surface. But don’t just go full tilt and get out the roller. Start by testing a small patch of your wall to see how it looks and how it dries. If something looks amiss, at least you haven’t covered the entire wall.

7. Know The Finish
When repainting, most people focus on colour and colour only, but this is a mistake. Colour is just one piece of the aesthetic. Make sure you understand the type of finish as well, like whether it’s gloss, flat, or eggshell.

8. Get The Right Amount
The last thing you want to do when you’re halfway through a paint job is head back to the hardware store to buy more paint. There’s paint calculators available online to help you buy the right amount or speak to your hardware store’s paint expert.

9. Don’t Forget To Prime
Priming is a step a lot of novice painters like to skip, but it’s crucial. Primer feels like gruntwork, but it actually impacts the final result in a significant way, providing a base for the paint to stick to and actually saving you on paint.

10. Invest In Your Paint Job
There’s a lot of cheaper options on the market when it comes to paint and to brushes, but the last thing you want is paint that peels or brushes that leave bristles in your paint job. Spend a little extra and invest in the right tools for the job.

What to expect during and after the application of anti mold coating?

Evolving Elements Anti-Mould Plus+ is a premium broad spectrum water based biocide. This means that it effectively inhibits the growth of moss and lichen on surfaces that have been treated. This is an important step in the process for projects that involve cement and terracotta roofs. Our product also applies cleanly to a range of other substrates, just prior to applying primer and subsequent coatings.

Every step in a mold remediation plan is essential. However, the application of an anti mold coating with mold-inhibitors or antimicrobial additives will fend off further growth of mold, mildew and odor-causing bacteria on the coating’s surface for the long term.

Here is what to expect with the Evolving Elements mold resistant coatings:

Long-term protective coatings that breathe.

  • Contains EPA registered mould-inhibitors and anti-microbial additives
  • Prevent the re-growth of odor-causing bacteria, mold and mildew on the coatings
    surface
  • Formulated for long term performance
  • Breathable coatings allow damp materials to continue to dry even after coating application
  • Ideal product for use on water damage restoration projects and in high humidity areas
  • Water-based formulation
  • Products are low-odor minimizing unpleasant smells during application.
  • Low VOC (Volatile Organic Compounds)

Easy application with a nice, clean finish.

  • Applied in the same way as latex house paints
  • Available in different finishes.

Application Method:
Firstly, remember to mix thoroughly with a broad, flat stirrer. Do not thin this product as it is in a  ready to use form.

  • Evolving Elements Anti-Mould Plus+ can be applied using a roller, brush, pad, HVLP spray equipment or airless spray equipment.
  • If applying on roofs, application with a garden type weed sprayer is recommended. If using airless spray equipment, a 15 thou tip and white gun filter is recommended.
  • Apply enough Evolving Elements Anti-Mould Plus+ to adequately “wet” the surface.
  • When applied as part of a roof restoration, Evolving Elements Anti-Mould Plus+ must be over coated using the appropriate components selected from the Evolving Elements range.

What should I expect during and after application?

Application and dry time

An odor similar to latex house paints may be present until the coating is fully dried. The coating’s drying process typically takes a few days, but is contingent on factors, such as:

  • Humidity levels: The lower the humidity, the quicker the drying process.
  • Good ventilation: Good ventilation and dry air movement will promote the drying process. Wet, coated surfaces should never be covered with plastic, drywall or finishes, as it will hinder the drying process.
  • Equipment used: This might include air movers, negative air machines, fans and dehumidifiers.

Finished appearance

Natural Wood knots and the wood’s grain, color, and porosity may have noticeable variations in the coating’s appearance when applied correctly.

However, this is normal and does not affect the coating’s resistance to mold growth. The tested areas show no mold growth where the coating appears lighter due to variations in the wood. Pre-existing stains and markings that may show will also not affect the coating’s mold resistance.

Looking to Repaint? How to Pick the Right Premium Interior Paint For Your Home

Looking to Repaint? How to Pick the Right Premium Interior Paint For Your Home

Choosing interior paint can be stressful, but it doesn’t have to be. At Evolving Elements, we understand that there are lots of options to consider from colour to finish and then, of course, quality.  Our premium interior paint continually sets industry standards for quality, performance and value. This is because we focus on innovation, research and development of new products with a continued commitment to create the best option for professionals.

If you’re stuck in the process of choosing the right colour or type of paint for the inside of your home, you’re not alone. Many people find it daunting to commit to a colour or a finish. There are a few ways that you can approach this big decision.

We find that most people begin by selecting their colour.

Warm or Cool?

The easiest way to do this is to select a trending colour – whites and off-whites are always the most popular choice. A simple trick to figuring out if your space is best suited to a cool or warm toned white is to consider the age and style of your home. More contemporary or industrial spaces fit a cooler white, that have more of a blue tinge to them. Victorian style or older spaces with period character sit more comfortably with a warmer white.

Colour-matching systems have improved to the point where you can get to the colour you crave in just about any brand. At Evolving Elements, we can match any colour swatch from any brand – even from sample colours of paint – with perfect results every time.

Once you’ve settled on a colour, you can now focus on finding the best sheen for the job.

Generally there are two types of paint to consider:

Flat Paints

  • Absorb light
  • Colours seem darker
  • Hide imperfections
  • The least stain-resistance finish
  • Best suited to low traffic areas

Glossy Paints

  • Reflect light
  • Colours look brighter
  • There are several levels of glossiness

Semi Gloss

  • Shiny finish
  • Stands up to stains
  • Easy to clean, but may dull when scrubbed
  • Ideal for kitchen and bathrooms, windowsills and woodwork
  • Requires a smooth, well-prepped surface

Our ratings make it easy to tell how well a paint hides what’s underneath it, how smooth the finish will be and the degree to which the finished product resists stains, scrubbing, gloss change, sticking, mildew and fading.

Choosing the Premium Exterior Paint that will outlast the elements.

Choosing the best quality premium exterior paint is a vital part of the paint selection process. You must consider a coating that can withstand – to a high grade – prolonged exposure to harsh weather conditions and UV radiation. Any paint projects can be ruined by selecting an ill-fitting paint. To aid in the selection process, JPS Coatings and Evolving Elements have created a unique, high quality, specialized range of exterior paints. The Melbourne-based company endeavours to improve the built environment through supplying faultless premium exterior paint. The product is continuously being tested in the harshest elemental conditions imaginable and every time the competitor product falls short in as little as 12 months.

The Exterior Acrylic Matt Finish

This is a superior choice for most projects. It is an easy-to-apply, water-based, and self-priming acrylic paint. It is suitable to use on a wide range of exterior wall substrates.

  • Timber
  • Fibro
  • Bricks
  • Masonry
  • Zincalume
  • Galvanized Iron

This extraordinary paint is also applicable for exterior features:

  • Fences
  • Pergolas
  • Decking
  • Walls

This premium exterior paint is available in White, Light, Mid and Strong Bases. It is also well suited to be tinted to any colour match for a project specification. The Exterior Acrylic Matt Finish quickly dries to a matte finish and in the vast majority of walls and substrates, does not require primers.

The non-toxic Exterior Acrylic Matt Finish delivers excellent durability, while also providing top-level mould, algae and water resistance. This range can be considered as a paint-and-primer in one product.

The Exterior Acrylic Lo Sheen

An easy-to-apply, self-priming, water-based acrylic paint, this Lo Sheen coating is specially created to provide expert durability, resistance to growth and proliferation of mould and algae. This paint is non-toxic, low odor and well suited to both a variety of substrates and outdoor features such as pergolas, fencing, walls and decking.

Exterior wall substrates that will work well with this product:

  • Timber
  • Fibro
  • Bricks
  • Masonry
  • Zincalume
  • Galvanised Iron

This is a specially created product that dries to a lo sheen and is available in White, Light, Mid and Strong bases. It can also be tinted to a wide colour palette to fit any required painting or project specifications. The specific formulas in these coatings are uniquely created to greatly enhance durability against all weather conditions. The testing process that is completed; forces the elements onto the paint at a level that is not ever seen in the natural environment. With these acrylic paints your exterior will remain as vivid and high quality as the day of application.

The exterior painting process requires detailed planning, preparation and specialist paint types. There are no exceptions to the quality and the ease-of-use for every product created by JPS Coatings and the Evolving Elements product range. These two options are engineered with the harshest Australian climates in mind. Made to withstand extremes from both ends of the spectrum – dry and dreadful heat, extreme UV exposure, humidity, rain, hail, snow, chill. Don’t bother looking elsewhere, they’re not us.

 

Painting Old and Aged Roof Tiles for a Fresh Look!

JPS Coatings proudly offers Evolving Elements, a unique solution for outstanding concrete roof tile coatingThe Australian-owned and operated company has specially formulated a complete range of components for a high-performance roof coating system.

Australia has seen the use of roof tiles since 1844. Local companies started hand making concrete roof tiles in Melbourne and Sydney in the 1920’s, so it comes as no surprise that this rugged roofing is still on some of Australia’s residential properties throughout the east coast. Though they may still be partially waterproof and doing their job at protecting your house from the elements, there is something that is lost when they are covered in mould, bird droppings and fading from their once-rich colour.

HOW TO APPLY THE CONCRETE ROOF TILE COATING SYSTEM

This is a comprehensive guide created by Evolving Elements to outline their specialist made concrete roof tile coating system. Evolving Elements is a leading roof coating choice used by professional roofers and restoration experts.

SURFACE PREPARATION:

There is no arguing that this is the most vital step in the process. Begin by removing down-pipes and creating a safe working environment for you and anyone working with you.

Prior to pressure cleaning, the applicator is required to repair any broken or leaking tiles, penetrations, flashings and timber-work. All substrates must be free from all forms of contamination including dirt, dust, grease, oil. Done thoroughly, this will prevent bond breakage. It’s recommended that high-pressure water blasting is used as the method of roof cleaning.

  • Premclean is applied before pressure cleaning to assist in the removal of contaminants. This high grade product is specifically designed to release moss, lichen and deposits of oil and grease from a range of substrates – resulting in the prevention of film defects. This also makes the next clean faster and more effective.
  • A coat of Anti-Mould Plus+ is then recommended to inhibit the re-growth of mold and lichen.

ROOF POINTING:

The cement bedding can now be replaced, after the pressure cleaning has been completed. Roof pointing is an industry standard roofing technique whereby the roof bedding is coated with a specialized compound that promotes stronger bondage of tiles. It also seals the entire roof against dust and water. Conventional mortar has a reputation of cracking and giving way to water penetration after a period of time.

  • Durapoint is the Evolving Elements’ solution. It is a flexible roof pointing material for use on old and new roof tiles. Specially formulated, this compound delivers excellent performance by contracting and expanding with fluctuating weather conditions. The applicator will only need to apply one coat of Durapoint to seal roofs for a full decade provided the complete system is adhered to.

PRIMER COATING

The substrate must be cleaned after roof pointing before progressing to the priming stage. This coating process must follow immediately after cleaning as the roof cannot be left uncoated. This may hinder the adherence to subsequent coatings.

  • Primecrete is applied in one coat to reduce the absorption loss of the remaining system.
  • Levelcoat may also be applied as a surface leveler if the concrete roof tiles are eroded or uneven, prior to the top coat.

TOP COATING

  • Duramembrane is applied as a top coat to restore, rejuvenate and seal old and aged roofs. This coating is 100% acrylic based, making it highly durable to withstand extremes of Australian and Southeast Asian weather.

Terraglaze Plus+

Terraglaze Plus+

Description 

Evolving Elements Terraglaze Plus+ is a highgloss 100% Acrylic Roof Membrane, specifically designed to seal, restore and rejuvenate old and aged unglazed Terracotta roofs to a new look as a clear coating or recoloured to a more modern colour. Terraglaze Plus+ is a highly durable clear or pigmented coloured flexible finish, formulated for excellent resistance in Australian and Tropical weather.

Features and Benefits 

  • Vibrant Gloss
  • Water based, easy to apply, easy clean up
  • Excellent water resistance
  • Excellent durability and weather protection
  • Strong Adhesion and low dirt pick-up
  • Used as a clear coat sealer or as a coloured coating

Combo Primer Hi Build

Combo Primer Hi Build

Combo Primer Hi-Build is a premium water based coating that has both priming and filling binding properties. It is extremely effective when tiles are slightly porous and don’t require too much of a high build to seal the surface. This high-grade coating is designed to be used in conjunction with the Roofcoat System.

It is recommended for use on most concrete tiles and has excellent adhesion properties prior to the application of DURAMEMBRANE or TERRAGLAZE PLUS coatings. It substantially upgrades the overall coating system durability & ensures greater system consistency of the top coat.

Features and Benefits

  • Water based
  • Easy application and clean up
  • Strong adhesion
  • Excellent durability
  • Easy to apply
  • Saves time on priming the surface

Protective Film Plus

Protective Film Plus

Evolving Elements Protective Film Plus is a transparent peelable protective coating designed to protect non-porous surfaces from damage caused by; paint, mortar, render, abrasion, staining, spillage and scratching.

Features and Benefits

  • Simple application by 20mm Long Nap roller, airless spray or HVLP
  • Cost effective
  • Prevents damage caused by tradesmen during construction
  • Enviromentally friendly, water based, no poisonous fumes, not flammable
  • Non-aggressive
  • Low odour
  • Available in Blue (transparent) or White(opaque) finish
  • Easy to remove
  • Fast air drying